Question, I recently bought a new arrow rest. Qad fall away. I shoot with the knocked vien up. But it seems the bottom two viens are hitting the rest. there is black streaks on the bottom two. I set it up the way it was instructed, everything seems to be right, the two marks line up at full draw just wandering about the timing on the rest.
-
-
What bow are you shooting? I had the same problem on my Hoyt vector. Had to get a different fork. Don't know the technical term. -
Bowtech AssassinComment
-
Yes, it could be the fork. (ask Jerry Reeves at RBO).
Make sure those lines are not lined up until the very last 3/4" inch of your draw. Also, check the cam timing.Comment
-
Which model qad do you have?Comment
-
I was having the same problem and switched to shooting the cock feather down and fixed the problem. I am shooting Blazer vanes on my ACC'sComment
Comment