Quiver question ?

[GTRH8R]

Thank you Chew for that review you posted really helpful. I am just not sure if I can squeeze the $125/135 for a quiver when I don't really spot and stalk hunt.

All I do is stalk and spot and I ain't dumping that much cash on a quiver. I have an Octane for $45 that works just fine.

[Okiehunter]

Naysayers have never used a Tight Spot quiver.

TightSpot Quiver slides in tight to your bow, where it exerts virtually no accuracy-affecting torque! For the first time, your quiver will help, not hinder your shooting. The TightSpot adjusts to the right spot on your bow to give you overall system balance and to fight accuracy-affecting torque.

The TightSpot Quiver's exclusive "Right Spot" 3-Way Adjustment System lets you fine-tune the balance of your bow using your quiver. The result will be an incredibly well-balanced hunting setup that will help you shoot better with your quiver on than you ever did with your old quiver off!

The TightSpot Quiver's 4-Way Integrated Vibration Absorption System attacks vibration from every conceivable angle. In fact, these features work so well that your bow will vibrate less with a TightSpot attached than with no quiver at all!

The Ultra-tough "hood" is virtually unbreakable! How tough is the hood on a TightSpot™ Quiver? Tough enough that you can literally drive over the hood! It will not break! Made of a new space-age polymer, the low-profile hood also offers less wind resistance when shooting on windy days.

Extra deep hood keeps broadheads covered. The gripper system is so good on the TightSpot that you only need to put the tip of your broadheads in the foam. The hood on a TightSpot is extra deep so razor sharp blades are not exposed. This is safer and keeps the blades sharp as well. The result is broadheads that are ready to shoot and are not exposed.

One-handed quiver removal. A simple lift of the QuickLock Cam disengages the TightSpot Quiver from the dovetail base it rides along, allowing you to quickly and quietly removes the quiver or adjusts its position with just one hand! No need to grab the hood and risk a sliced finger like on other quivers. Slide TightSpot in close to your bow and it will balance like no other quiver! Pushed back down, the QuickLock Cam securely locks the quiver into place.

TightSpot's TailFanTM design positions arrows so fletchings won't vibrate together or make noise.

Quick Draw System keeps your #1 arrow in ready position. We’ve all been there... where we need to quickly remove an arrow from the quiver in order to get a shot. The TightSpot Quiver is unique in that the arrow gripper nearest you faces back at you instead of off to the side like the other grippers. This subtle difference means less conspicuous lateral movement and can make the difference between a fleeing animal and getting off the shot!

The Tightspot weighs in at 10.05 ounces with an overall Length of 19 ¾ inches. The distance from hood to gripper is 18" (the longest distance of any one-piece quiver) providing a secure platform to hold the arrows. Structure is super premium wrapped carbon rods/machined aircraft aluminum and the arrow gripper is Arrow Wedge with independent arrow adjustment. Arrow Capacity, five (5) either aluminum or carbon arrows.

You might say I am a Tight Spot fan; I liked mine so much I became a dealer.

[GregH]

I love mine...

[Dspivey]

Naysayers have never used a Tight Spot quiver.

TightSpot Quiver slides in tight to your bow, where it exerts virtually no accuracy-affecting torque! For the first time, your quiver will help, not hinder your shooting. The TightSpot adjusts to the right spot on your bow to give you overall system balance and to fight accuracy-affecting torque.

The TightSpot Quiver's exclusive "Right Spot" 3-Way Adjustment System lets you fine-tune the balance of your bow using your quiver. The result will be an incredibly well-balanced hunting setup that will help you shoot better with your quiver on than you ever did with your old quiver off!

The TightSpot Quiver's 4-Way Integrated Vibration Absorption System attacks vibration from every conceivable angle. In fact, these features work so well that your bow will vibrate less with a TightSpot attached than with no quiver at all!

The Ultra-tough "hood" is virtually unbreakable! How tough is the hood on a TightSpot™ Quiver? Tough enough that you can literally drive over the hood! It will not break! Made of a new space-age polymer, the low-profile hood also offers less wind resistance when shooting on windy days.

Extra deep hood keeps broadheads covered. The gripper system is so good on the TightSpot that you only need to put the tip of your broadheads in the foam. The hood on a TightSpot is extra deep so razor sharp blades are not exposed. This is safer and keeps the blades sharp as well. The result is broadheads that are ready to shoot and are not exposed.

One-handed quiver removal. A simple lift of the QuickLock Cam disengages the TightSpot Quiver from the dovetail base it rides along, allowing you to quickly and quietly removes the quiver or adjusts its position with just one hand! No need to grab the hood and risk a sliced finger like on other quivers. Slide TightSpot in close to your bow and it will balance like no other quiver! Pushed back down, the QuickLock Cam securely locks the quiver into place.

TightSpot's TailFanTM design positions arrows so fletchings won't vibrate together or make noise.

Quick Draw System keeps your #1 arrow in ready position. We’ve all been there... where we need to quickly remove an arrow from the quiver in order to get a shot. The TightSpot Quiver is unique in that the arrow gripper nearest you faces back at you instead of off to the side like the other grippers. This subtle difference means less conspicuous lateral movement and can make the difference between a fleeing animal and getting off the shot!

The Tightspot weighs in at 10.05 ounces with an overall Length of 19 ¾ inches. The distance from hood to gripper is 18" (the longest distance of any one-piece quiver) providing a secure platform to hold the arrows. Structure is super premium wrapped carbon rods/machined aircraft aluminum and the arrow gripper is Arrow Wedge with independent arrow adjustment. Arrow Capacity, five (5) either aluminum or carbon arrows.

You might say I am a Tight Spot fan; I liked mine so much I became a dealer.

I see your point, also it looks great on your bow. I said earlier that ill stick with my apex quiver it's actually an Octane quiver. But when extra funds do come in reach ill probably reach towards a tight spot quiver.