Looking for 1 3/4" square tubing

[hrdwrkncwby76]

I only need 6' does anyone have any scrap laying around?

[Traildust]

I only need 6' does anyone have any scrap laying around?

Steel Supply carries it....should be about $ 27.00 for a 24' 11ga stick

[hrdwrkncwby76]

I would go that route but I have no need for the remainder of a full stick like that

[Traildust]

I would go that route but I have no need for the remainder of a full stick like that

They sell 4' pieces too....not sure about 1.750" though...call 'em

[Brandon1574]

If your around college station buy the 24' I will buy what you don't use

[PBFrijoles]

If 2" would work for you I think I have some you can have.

[hrdwrkncwby76]

the tubing I currently have is 1/8"walled 2" square. I need the 1 3/4" to slide inside of it

[whiteboycustom]

make feeder legs out of the rest?

[Draco]

The inside of the 2" with 1/8' wall is 1 3/4". The tube you want is 1 3/4". I think that will be a pretty tight fit.

[hrdwrkncwby76]

yes it will be fairly tight but there is way to much slop and play with 1 1/2" tubing