DeerView Hunting Stand Release

[thehunted]

DeerView Hunting Stands



Engineered with Thermacore™ Technology


We at DeerView strive to be the best in providing quality products for all
hunting enthusiasts’.



All of our stands are made from a Thermacore™ laminated wall panel. Wall
panels consist of a heavy embossed aluminum skin on the exterior for a
water and airtight seal. The aluminum exterior skin in addition to giving
a full concealment, gives you a maintenance free exterior that will last a
lifetime.




Walls are conformed of 1.5# EPS density foam. Expanded Polystyrene (EPS)
is a thermoplastic, closed-cell, lightweight, and rigid-foam plastic. The
1.5# EPS density foam will also act as a sound barrier within the stand.

The interior of the stands have been finished off with plywood, allowing
ease and convenience of attaching shelves, racks, carpet, and that
infamous picture of your in laws.


By using Thermacore™ Technology, these three components are laminated
together to create one solid wall unit. This process is done by placing an
adhesive glue between all three components and placing wall panel in a
vacuum chamber for a duration of 30-60 minutes, which removes all air in
between layers and compressing all into one bonded unit.



In addition to the Thermacore™ Technology used in our stands, DeerView has
a variety of other key elements.

All treated wood in base is comprised of .40 CCA treatments.

Our Blind Door is constructed of 1 3/8” thick x 3 ¼” wide heavy gauge
aluminum with a plywood insert, with a top layer of heavy embossed
aluminum sheeting. Door consists of four hinges, solid aluminum gussets in
the corner and is fully weather-stripped. Door also has an adjustable
bottom expander with dual vinyl sweeps.



All DeerView Hunting Stands come stock with our horizontally mounted twin
sash-sliding window. Giving you the option of opening either end or
lifting out both sashes giving you access to the entire opening. Window
mounts from the outside, giving you that flush exterior look.

All stands come stock with rain guards over each window.



DeerView Hunting Stands are fully insulated from floor to ceiling, which
is a key element in holding heat and reducing internal noise.

Bottom of windows are 39” off of the floor, and 51” to top of window.

Inside height of blinds is 78” at lowest point.

DeerView Hunting Stands are airtight, odor and maintenance free.

Stands are fully insect and varmint proof.


4' x 4'
Ground Blind-$1,599.00

Standard w/ (3) 36" x 11.5" Horizontal Slider (clear glass) and (1) Blind
Door 30" x 72" w/ Key Lock (2 Keys)

Blind w/ 1' Tower-$1,774.00
Blind w/ 5' Tower-$2,049.00
Blind w/ 10' Tower-$2,249.00
Blind w/ 15' Tower-$2,499.00

4' x 6'
Ground Blind-$2,199.00

Standard w/ (2) 36" x 11.5" Horizontal Slider (clear glass) (1) 60" x
11.5" Horizontal Slider (clear glass) and (1) Blind Door 30" x 72" w/ Key
Lock (2 Keys)

Blind w/ 1' Tower-$2,479.00
Blind w/ 5' Tower-$2,749.00
Blind w/ 10' Tower-$2,949.00
Blind w/ 15' Tower-$3,199.00

6' x 6'
Ground Blind-$2,899.00

Standard w/ (3) 60" x 11.5" Horizontal Slider (clear glass) (1) 36" x
11.5" Horizontal Slider (clear glass) and (1) Blind Door 30" x 72" w/ Key
Lock (2 Keys)

Blind w/ 1' Tower-$3,354.00
Blind w/ 5' Tower-$3.599.00
Blind w/ 10' Tower-$3,799.00
Blind w/ 15' Tower-$4,049.00


This message is DeerView approved...

Thank you,
Tyler Ray

[SuperDave]

Very cool...

[gig one]

nice

[thehunted]

Very cool...

Thank you. We are very proud of this launching.

[thehunted]

ttt

[thehunted]

nice

Thank you

[BigThicketBoy]

Nice .

Sent from my C771 using Tapatalk 2

[hchunter]

Awesome stands

[thehunted]

Awesome stands

Thank you

[thehunted]

If any of you have questions please feel free to let me know. I have received a lot of PM's; if I missed yours by chance please let me know.

Total of seven stands have been SOLD since starting this thread. Thanks for continuing to support DeerView as we continue offer quality products.

[STex]

To be honest, the prices are pretty fair.

[thehunted]

To be honest, the prices are pretty fair.

Thank you for your reply. We make it a goal to be as competitive as possible while offering quality products to all. We are thrilled to be the newest stand in the market, and have always stood behind our products 100%. With our new Thermacore™ Technology process, it certainly raises the standards.

[Wall_Hanger]

I may have missed it but are they available in different colors?

[thehunted]

I may have missed it but are they available in different colors?

They are only offered in our almond as seen above. Exterior skin is easily paintable to your likings if desired.

- I personally have never "camo'd" any of our stands on any of our properties. Always been one solid color, get it out in the field, and it becomes part of the everyday surroundings.

[thehunted]

I will answer this for all:

Another question I have received multiple times. Seems like several are very interested in purchasing (not locally) and are wanting samples of our wall structure.

Question I have been asked. Is there anyway I can see the durability of your wall construction without coming to your warehouse and physically see..

The answer is YES. I can send out a 4"x4" wall sample to anyone who inquires. I, myself am a "touchy feely" person, especially when it comes to large purchases.

All I ask in requesting, simply send me an email to tyler@deerviewwindows.com, with your inquiry along with shipping address.

Once again thank you all for your interests.