Sighting in a one pin slider

[one66stang]

My sons bow shoots 218fps. About how much drop are we going to have at 60 yards with a 20 yard zero.

I'm trying to figure out how high I need to stack targets so when he groups at 60 yards we aren't hitting dirt.

Thanks

[Sideler]

If your using an HHA sight, I would use the 20 40 method it might save you some arrows.

[Fregia22]

My bow shoots 307 fps. I used the 20/40 method and sighted in my hha sight perfect to 75 yds...

[KRS]

You can use the 20 - 60 method just work you way back to 60 slowly so you don't have arrows in the dirt.

Sight in a 20, back up to 30 shot until you are on the target, back up to 40 shot until you are on the target, repeat at 50, then make sure you are accurate at 60.

[lesson 101]

You can use the 20 - 60 method just work you way back to 60 slowly so you don't have arrows in the dirt.

Sight in a 20, back up to 30 shot until you are on the target, back up to 40 shot until you are on the target, repeat at 50, then make sure you are accurate at 60.

X2

[Grumbler]

x3
Work out yardage slowly and in gradual increments.
Looking for a good 10 arrow group centered left to right and up and down before moving on. By the time you get out to your max range, form / technique will more likely be consistent, and you will get it dialed in right the first time.
Now...it's never happended to me of course , but I hear that if you rush into it and don't set up based on large volume groups accurately, that one might have to re-adjust / use a different tape.

[one66stang]

thanks guys