Varmint swivel seat gun rest?

[gargetter]

Setting up a varmint calling rack for my jeep.What I need are some ideas on how to make swivel detachable seats with a gun rest that also swivels.Looked at boat seat pedestals, which would work,but how would you do the gun rest?Any ideas? Anyone Have pic's? Thanks for any help.

[TexasDon]

Varmint swivel seat gun rest?

I would think square tube from under seat and up in middle between legs would work fine

[Flint knapper]

The easiest way to do it is to attach the rest directly to the seat with a bracket that goes under the seat. It should be attached by the four screws that also hold the seat on the peistal.
that way whenever you turn the seat, the gun rest will move with you.

The old Game Tamer quadpod had such a rest that came up between your legs and ended on top with a T that was covered in pipe insilation.
You could move it up and down using a T-screw to tighten of loosen for adjustment for the individual.

[Deer Tamales]

Here's mine.... We welded to a plate underneath office chairs. We made a hinge so you can raise them to sit down and lower back down to shoot.

[gargetter]

Thanks guys,anymore ideas? Needs to be removable.

[gargetter]

ttt

[rossivey]

Here's mine.... We welded to a plate underneath office chairs. We made a hinge so you can raise them to sit down and lower back down to shoot.

That's a sweet setup!

[Quackerbox]

We used a bass 'but seat' for the ranger rack. A single piece of 1/2 rebar with a T welded to the seat base is all we have. Its gusseted to keep it from bending or bowing. It also folds down for travel on the road or through the trees.