Putting the spin on Blazer 2" vanes

[jlptexashunter]

I've managed to peel the Blazer vanes off all but one of my practice arrows so it's time to re-fletch. This got me to thinking that I should maybe do some experimenting. I'm thinking about trying to put a little spin on these Axis/Blazer combos.

Do any of you Blazer shooters put some turn on your small vanes? How hard is it? Will I see any benefit?

[Texastaxi]

I fletch all my blazers right helical. Works like a champ.

[Rsatt]

JL, we fletch blazers straight at Gander, with just a touch of right helical. Works Good. A full right helical is hard for us to do on such a short fletch.JMHO>

Might consider the Quik Spins

[shotgunsmitty]

I honestly doubt you'll see much benefit.
I fletch with an Arizona with a touch of right helical like Rsatt was saying. Works like a champ every time.

Good to see ya, Ronnie!

[rbridges00]

ditto

[Pflyinguy]

I use Bohning's Tower fletching jig which is set at 2 degrees right. Works like a champ! I called Bohning and that is what they recommend.

[Roger]

I use a helical clamp. Have to get it just right to get a good stick to my Gold Tips, but it puts a small bit of twist in them that I prefer.

[Chance Love]

I fletch mine with right helical as well. Works great.

[Dale Moser]

Whatever my Az. EZ Fletch puts on'em.........that's what I do! It's a slight right offset I believe.

[Dajcentex]

I honestly doubt you'll see much benefit.
I fletch with an Arizona with a touch of right helical like Rsatt was saying. Works like a champ every time.

Good to see ya, Ronnie!

Me too except that it fixed the problem with my fixed blades not hitting the same. it made all the diffrents i needed.

[WCB]

I use both an Arizona straight w/1 deg offset and Rt. Helical on my Blazers. The Rt. Helical seems a little more accurate but I'm also shootin a new SB XT. That Mathews is so accurate I can aim it backwards and still hit the bullseye...

[Flame-Tamer]

AZ fletcher R helical is what I started using and they do good.

Hank