i found a clear expoy resin that has plastic bb's in it. designed as a slip resistant coating for wet locations. if i put this in the bottom of my john boat will it work? Will it crack? the boat has a ton of movement in it and i dont want it to bust up and look bad.
-
-
YES it will crack. -
Use the DIY bed liner for the bottom of the boat. If it cracks up, you can repaint the affected areas.Comment
-
the only diy bed liner i have found it black. that equals HOT!!!!!!!!!!!!!!!Comment
-
It will crack.Comment
-
You could use a type of epoxy/paint and before it dries throw some sand (sand blasting) material on top. After it dries put a top coat and it will be slip resistant.
Comment
-
Most epoxies dry to a very hard finish and are not flexible. You may try an elastomeric roof coating designed for metal flat roofs. They are more flexible, come in white, and some can be tinted to other colors. Uniflex is a good product to look at.Comment
-
Paint it white with some cheap rattle can paint. It isn't as hot as you might think. Seriously.Comment
Comment