Question for Bow Technicians or those who can answer

[coachk43]

Okay, here it goes:

I just received my HHA 2" sight.



I've attached it to my bow and started the process of sighting it in.

However, I've gotten it close on Left and right lineup... BUT, when I look through my peep sight, I can see the middle cables in my sight. The cables that are on the roller glide:



I've never had this problem with any other sight, nor do I think this should be the case here. Looks similar to this below but imagine at full draw through the peep.



I have a QAD rest.



Can I move the rest out more to eliminate this problem or is this something I need the fine folks at Triple Edge help me with?

[Bonesplitter]

Go shoot it at 10 yard's and adjust it to the impact, then move out to 20 and see what you got.

[coachk43]

Go shoot it at 10 yard's and adjust it to the impact, then move out to 20 and see what you got.

Adjust the rest?

[coachk43]

I'm zero'd in as far as left and right are concerned, but, the sight housing in so right that it is allowing the cables to be visible through my peep

[Bowanta]

When you knock and arrow, is everything square? Looks like you sight is way left of your rest. Loke stated above, start at 10 yds and adjust to impact. Then move to 20, and so on.

[DFWPI]

I would take it to the pro shop and let them take care of it.

[Bowiecounty]

i would take it to the pro shop and let them take care of it

This is what I would do as well.

[Bowiecounty]

After a second look though it looks like u have room to move your rest to the left and then possibly move your sight back to the left which may fix the problem.

[AlaskaFlyerFan]

If your center shot was correct before you changed the sight and you didn't move the rest, then nothing should be different. Did you move your rest to install the sight? If you didn't then I'm not sure what the issue could be. Changing the sight should have no effect on the rest. Is the housing of the sight bigger or smaller than your last sight and you are just noticing the cables?

[Bonesplitter]

Is the rest lined properly as far as center shot? Did you install the rest yourself?

[coachk43]

Yeah, I had to move the sight way left to remove my light and lens. Thats how i took the picture. But when I move it back right, when all is lined up, that's when I have the problem. See below; this is pretty close to center. You can see how a third of my sight housing is not visible. I just don't think that's right, but I've never had an HHA either.

[Bonesplitter]

Are you torquing the bow? Relax your grip a little and she what it does.

[coachk43]

Is the rest lined properly as far as center shot? Did you install the rest yourself?

Rest was fine before. Set up by Triple Edge when I bought my Mathews Z7X (Had to get that in there for advertising purposes ). But the HHA housing is definitely bigger than the old Spot Hog I replaced:

[coachk43]

Are you torquing the bow? Relax your grip a little and she what it does.

Still there

[Bonesplitter]

That's probably the problem, bigger sight housing. Swing by and get Robert to tune it up with some "Bowhunter Love"