I need help!!!!

[BrianW]

I shot a Bowtech destroyer 350 60# 27" draw, had Kyle at CCR put new strings and cable,i shot it and,was all over the place n peep would stay twisted to rt,so I took it back to Kyle an he spent an hour working on it,when I left it was shooting bullet holes,well I have been shooting after work an still cant get my BH's to group,im using a tru fire 3d hunter,put on my wifes scott sabretooth an did better but still not consistent enough to shoot a deer,what can I do?? Oh my arrows are carbon force radial x-weeves syl hunter 200's... Any advice or input is appreciated.... Thanks Brian

[BrianW]

No one has any advice as to what my problem could be?

[bowhuntntxn]

Which way are your BHs off? Are they all over or are they grouping together but not on bull? Not enough information. And the release might help a tad, but if the set up is off or the arrows are the wrong spine, it won't matter.

[BrianW]

Glen,to me they are all over,one time I can get 2 of 3 close but couple inches from where im aiming,they might go left and then one will go rt 4-5 inches,could I be torquing the bow after shot? From the arrow chart the arrows should be good....Set up should be fine as like I said had Kyle at CCR install new string n cable n tune it to shoot bulket homes in paper....

[BrianW]

Maybe I need to go for some instructions to see if its my forum or a bad habit that I have developed an dont know it

[Brett C]

How many shots on the new string ? It might have stretched causeing it to be out of tune. Try changing broad heads. Does it hit good with field tips ?

[bowhuntntxn]

Was it shooting BHs fine before you changed the string? All over the place could be a lot of different things, but mostly the shooter. And bullet holes in paper in a shop does not necessarily indicate a truly tuned bow.

Any contact with vanes? Did you just change the string or string and cables? Have you checked the specs to see if it is still set to factory specs? Too many variables to give a clear direction.

Tru fire 3d hunter is a thumb release right? Is your anchor the same every single time, and is your peep in the right spot? Could be punching the trigger, or have poor form. Hard to say.