I asked a bit a go and a couple guys here seemed to have great knowledge on some of the electrical issues I was facing with this tractor. The next issue I've got is with my Hydraulic Pump control. Its a Massey Ferguson 135. It has a Draft and Position control. The Draft position works perfectly raises and lowers the tractor as it should. But the position control lever which locks the 3 point position for mowing etc does nothing. I took off the access plate it does not move the pump control piece inside.
I believe it is stuck in the constant pumping position even though the lever moves out but I can't find any information online on what to do to get it out of constant pumping mode and back to where I can control the 3 point correctly.
I believe it is stuck in the constant pumping position even though the lever moves out but I can't find any information online on what to do to get it out of constant pumping mode and back to where I can control the 3 point correctly.
Comment