Trolling motor switch out question

[2050z]

Trolling motor with foot pedal

Bracket

Power supply

Okay you see my current setup with my trolling motor.
The trolling motor works, but the speed adjuster is broken.
I am wondering if I could get a newer trolling motor and still use my current bracket and power supply plug.

[topher5999]

It is going to be very hard to find something like that bracket and plug. If your staying 12v you might be able to find a plug but 24v no way. Bracket is the tuff one. I would just buy the whole setup and get a new outlet.

[2050z]

I do not have much room up front and all the new bow mounted TM's are huge. I considered a pontoon trolling motor, but I need to see one up close before I decide.

[CARLOCK]

U should try Boris marine in ftw they can probably help u...

[2050z]

I am go over to Plano Marine to see what they have to say

[Luck_of_the_Draw]

If the shaft size is the same you should be able the put the new shaft into that mount.

[tgil]

You CAN probably still use both. remove the old plug from old motor and use it on the new one. Shafts will probably still be the same size.

[fowlwaters]

That plug is a 220 volt plug you can remove it and put on new trolling motor if you want to stay with that.

[2050z]

Thanks guys. I thought about having the trolling motor fixed, but it might be cheaper to just get a new/used one. This is my first boat so I am really a rookie at this stuff.

What make and model would you recommend?

[fowlwaters]

Minn kota

[2050z]

Minn kota

any particular model?