Announcement

Collapse
No announcement yet.

Climbing stand question......

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Climbing stand question......

    My question is how difficult is it to use a climber. I have been skeptical of buying one and was thinking about setting up a ladder stand, but I like the fact of being able to move locations easily. How quiet are they when you are actually climbing a tree, and how safe do y'all feel once up in the tree. I hunt in Walker county and primarily have Pine trees to work with. Are Pine trees good for climbing. Any suggestions are appreciated.

    #2
    Not that hard really and pretty quiet if you go slow even on pinetrees

    Comment


      #3
      They are not hard to use but I pretty much stopped using them because during bow season in East Texas by the time you climb a tree with one you will be soaked with sweat. They do make some noise climbing too but not alot. Pines trees are all I used them on and they work fine. I never felt unsafe while using one but if you get one make sure you tie the top to the bottom. Not a good feeling to be 20 foot up the tree and drop the bottom.

      Comment


        #4
        Originally posted by bowslayer View Post
        they are not hard to use but i pretty much stopped using them because during bow season in east texas by the time you climb a tree with one you will be soaked with sweat. They do make some noise climbing too but not alot. Pines trees are all i used them on and they work fine. I never felt unsafe while using one but if you get one make sure you tie the top to the bottom. Not a good feeling to be 20 foot up the tree and drop the bottom.
        ^^^ this!!

        Comment


          #5
          Originally posted by BigThicketBoy View Post
          Not that hard really and pretty quiet if you go slow even on pinetrees
          X2. I hunt in Hardin county and use Ol' Man Multivision climbers. They are fairly quiet and very comfortable.

          Comment


            #6
            Originally posted by BigThicketBoy View Post
            Not that hard really and pretty quiet if you go slow even on pinetrees
            This but be careful and don't bang anything against them

            Comment


              #7
              Just take it slow and you can be pretty quiet.

              Comment


                #8
                Expanding foam in the frame of the stand pieces takes the clang away when you bump them together. Climbing slow helps prevent sweating and making extra noise. Once in place they are as secure as any stand out there, and with a little practice they are an ease to climb with. Pine trees are the easiest to climb.

                Remember, always wear your safety harness and stay attached to the tree at all times,and you will be fine.

                Comment


                  #9
                  The hand climbers require good upper body strength. But usually are much lighter to carry/pack.

                  The sit and climb models are very easy to use but weigh just a touch more.

                  As to quietness, that depends on the hunter. Ladders can be noisy. Hanging a "hang on stand" can be noisy. A climber can be noisy too. But clanging any stand will make noise. Just don't clang the stand .

                  I'd consider "sit and climb" climbers to be quicker to set up, and quieter to get up a tree, than going in with a ladder or hang-on and setting up.

                  I've had several climbers, and have been doing evaluations on them over the years. I also utilize ladders, hang-ons, and tent blinds for my public land hunts.

                  One thing I've learned about portable stands (from hunting public lands): get the lightest stand possible for the style of stand you choose to hunt from. I've seen a lot of people get a stand thinking they are going to save a few bucks. And later regret having to carry it in with all their gear too. Stand comfort is another consideration.

                  Pines are usually pretty good trees for climbers. Look for ones that are fairly straight. If they lean slightly, I prefer the ones that lean back from the direction I will be facing. Being right handed, I also try to set up where I'll be shooting off my left side if possible. Or the shot will be to my left.

                  Always pick a tree that is healthy!

                  And always wear a harness!!!

                  Comment


                    #10
                    I love my API and have been using climbers were possible for about 15 years!!!

                    Comment


                      #11
                      I use them in Walker co. I prefer oaks to pines, but will climb what ever tree I can. Use your harness.

                      Comment


                        #12
                        I love mine. Summit Viper. I like being mobile and I like hunting high above the ground. 25-30 ft up. They are as quiet as you want them to be. My opinion is its always good to at least have one just in case.

                        Comment


                          #13
                          Thanks guys for all the input. I guess its time to go shopping now.

                          Comment


                            #14
                            Pine trees are okay because they are straight and fairly limbless,but the bark can be a bit tricky if you aren't careful. The chunks of bark can be loose and slick at times. Make sure the lower section has a good "bite" before you put all your weight on it.

                            Comment

                            Working...
                            X