Gun Smith

[Pernell]

I need a good gun smith in Humble, Houston area.

[Cajun Blake]

pistol, rifle , shotgun ?

what do you need done ?

[Slick8]

I'm not sure what you're looking for but if it's rifles give Pete Piper a call.

http://www.precisionbarrelwork.com/galframe.htm

The other one that I've used (rifle, pistol and shotgun) and just purchased a new rifle from is Briley Mfg. in the Memorial area (I-10 and the West Beltway). (713) 932-6995

[captainsling]

X2 for Pete Pieper. He is in Hempstead.

[Pernell]

It is a Ruger m77 22mag. Thanks for the info

[Pernell]

pistol, rifle , shotgun ?

what do you need done ?

Ruger M77 22mag. The problem is the clips that grap the shell to eject it, one side broke off. The gun is about 25 years old and been shot about 5000 rounds, so it needs some work.

[Cajun Blake]

Ruger M77 22mag. The problem is the clips that grap the shell to eject it, one side broke off. The gun is about 25 years old and been shot about 5000 rounds, so it needs some work.

you likely need a new extractor , possibly a new ejector

call Ruger and ask to speak to their customer service, explain the situation.

they may send you the replacement parts for free, and refer you to a local authorized Ruger dealer

[bboswell]

you likely need a new extractor , possibly a new ejector

call Ruger and ask to speak to their customer service, explain the situation.

they may send you the replacement parts for free, and refer you to a local authorized Ruger dealer

Best advice your going to get!

[Pernell]

you likely need a new extractor , possibly a new ejector

call Ruger and ask to speak to their customer service, explain the situation.

they may send you the replacement parts for free, and refer you to a local authorized Ruger dealer

Thanks a lot! I will call in the morning. Are they hard to change out or do I need a gun smith to do it?

[texaspyro21]

Call Ruger. They are great about fixing guns that break plus they will clean, oil and check everything.

[Cajun Blake]

Thanks a lot! I will call in the morning. Are they hard to change out or do I need a gun smith to do it?

here's your bolt disassembled


i'd send it to Ruger and let them go thru the entire bolt and replace any other worn parts

[Pernell]

here's your bolt disassembled


i'd send it to Ruger and let them go thru the entire bolt and replace any other worn parts

Thanks Blake I'm sending it to Ruger.

[BigTex.308]

For the future call Tim Killion in Liberty. He's pretty good.


281-684-0750





Ike