Jug line question?

[deadeye]

Alright so I took some advice from the GS on making the pool noodle jug lines. I tried them out this weekend and did ok. The only problem is I don't have a good way of tieing off the excess on the main line. Is there a good way to do that? Any modifications I can make?

[Mr. Whiskers]

Do you have room to attach a cleat to them?

[deadeye]

Ya I think so...

[Desperado]

hey deadeye you ever fish Hefner?

[Tommyh]

i was mesmerized!
[ame="http://www.youtube.com/watch?v=TmIO-PqMgFg"]Southern Jugg's Catfishing - YouTube[/ame]

[JMAR]

i was mesmerized!
Southern Jugg's Catfishing - YouTube

hummmm!

[deadeye]

Desperado- I've fished it a few times from the bank with not much luck. But now I got a boat so I'll probably be out there quite a bit trying to catch some marble eyes!

[Desperado]

lemme know how it goes! we used to fish there when we were kids but never really caught anything......you ever hear of anyone fishing in Coffee Creek anymore?

[Ironman]

i was mesmerized!
Southern Jugg's Catfishing - YouTube

Did you see the caps on those jugs?!

[Jamesl]

Did you see the caps on those jugs?!

I did.

[DrenalinJunkie]

Ummmmm So what was she making???

[bearintex]

I unwind the depth of the water plus a foot or so. Then just make a couple of half hitches around the small end opposite the float.

[BigTex.308]

I did.

Me too



Ike

[tx07]

If you build them with caps on both ends it is kinda a waste of $.
The work fine open ended on one end. Granted your not saving the bank, however you will lose jugs. So the less you pay making them. The less you $ you lose when it is lost.

i was mesmerized!

That video put my eye out!