do i need a press to adjust drawlength on xforce?

[dumas]

Just took delivery of '07 PSE xforce and was told I could adjust the draw lenghth with out a press... but am thinking that is not the case. Of course I bought it used and don't have the manual.

Attached are pics of the cams. Thanks in advance for any advice/opinion you experts and or xforce owners may have.

[Texastrophy]

If you want to change it 1/2" up or down, you'll need a press. If you are going to change it in 1" increments, you'll need to buy the right modules which are installed with an allen wrench and you won't need to put it in a press. X-Spot will sell you the modules if you can wait a few days on the mail service. It looks like your bow is set at 30" draw with 70% let-off if the draw stop is in the right place.

[Bill M]

Take a look at these two documents. They may help you. The owners guide is not model specific but does appear to cover the different cam systems.

http://pse-archery.com/2007_PSE_Archive/07_x_force.pdf

http://pse-archery.com/img/media/07_pse_ownersguide.pdf

[dumas]

Texastrophy, I think you are spot on. I was told it was a 29 draw length with 65% let off. I think I am going to need to lose an inch... can you post or email me X-spots email address to dumashellionATyahoo.com

Thanks for the links BillM.