Parker Co. Fence cost

[mdeaso]

Can any Parker Co people tell me what new 5 strand barbed wire fence cost per foot. OR surrounding counties. THANKS

[BLee15]

Just paid 6k turn key for 1900ft of 5 strand in clay county. Clearing was extra

[BLee15]

6ft Tpost are $5 a piece at tractor supply
$90 per roll of Sheffield 12.5g wire at Kerr feed
welded h brances about $150 a piece
16ft welded pipe gate was $250

can figure out price per foot based on that for materials so you know your aren’t getting ripped off.

[mdeaso]

You are the man thank u

[Sasqy]

Lots of rock in Parker Co.
Some places none, some are solid.

[aggie2000tx]

6ft Tpost are $5 a piece at tractor supply
$90 per roll of Sheffield 12.5g wire at Kerr feed
welded h brances about $150 a piece
16ft welded pipe gate was $250

can figure out price per foot based on that for materials so you know your aren’t getting ripped off.

Material cost is only 1 part of what it takes to build a fence. Labor, equipment needed are also important factors

[Dejashoot]

How much fence are we talking?

[mdeaso]

Around 4000 feet

[JunxMan]

In northern Young Co, I was quoted $2/ft + materials to repair and add t-posts --------- or $2/ft + materials to replace. The gates, braces, and corners are all still good; and no water crossings, and it was all clear except some greenbriar. That was 2,000 ft.

[Dejashoot]

Sent you a PM

[Big pig]

Line posts were a problem and high cost for us. A driven 2 3/8” tubing post every 100’. And 2 3/8” for bracing and in-line.
“H frames”. We used 2 7/8 “ for corners and gate posts . Prices were high and supply was low when we built 4 years ago (3-4 miles).
In my experience all posts should be driven, not dug snd cemented.

[mdeaso]

Thanks for all the help.