Truck parts guru

[Quackerbox]

Need a fitting for f250 oil cooler line. Of course ford wants to sell the whole enchilada but I need either the lower portion or preferably the fitting. However, I'm unable to make google act right

The fitting is one of those plastic snap on type with a 90 that clamps to the hose. It's labeled 35401 and pospossibly a "CS". Retired mechanic buddy says it's possible to get the lower but local parts store are more interested in 4x4 and flux capacitor equipped.

Read set go!

[txhunter1]

What year? engine?

[dclifton]

https://www.anhosefittings.com/fittings/plastic-fittings/5-8-hose-barb-to-5-8-15-82mm-sae-j2044-female-quick-connect-90-degree-elbow.html?gad_source=1&gclid=CjwKCAiA3ZC6BhBaEiwAeqfvymTLeiIZNF16IGe5fi52nLJVGgFVgmsRxaiH4gMsMWvuByUjARnaWxoCjNcQAvD_BwE

Should be real close to what you are looking for might double check the measurements to make sure both sides 5/8.

SAE J2044 connector is what those are. Some people call them a bundy style fitting. i know some parts stores carry an assortment of them.

[Quackerbox]

What year? engine?

2021 7.3 gas

[TexasBob]

https://www.anhosefittings.com/fitti...xoCjNcQAvD_BwE


Should be real close to what you are looking for might double check the measurements to make sure both sides 5/8.

SAE J2044 connector is what those are. Some people call them a bundy style fitting. i know some parts stores carry an assortment of them.

Based on the hose clamp near the broken piece, I'm thinking this may be the ticket.