Deal Alert - TSC Treeline #350 Corn Feeder cut $100

[Aggies96]

I know there are some mixed reviews on these but I bought 2 of them about 8 months ago and have had zero issues. They have their 350# on sale for $299 and their 600# is cut $50 at $450 These are heavy duty welded hoppers and legs and a pretty solid paint job. Heavier duty then the Bucees's that are $499. Simple bolt together and the controls and batteries are located in the hopper under the main lid. Highly recommend.

[ATXBowhunter]

I bought one of the 350# earlier this year and it has been disappointing. Like many other folks have said, the spinner plate won't drop enough to throw corn. Cust Servce at TSCO did email me with a solution, but it seems to be a widely known issue that should have been fixed during the design. Just my 2 cents.

[PondPopper]

They appear to be a very nice feeder design and adjustment of the spinner plate seems very simple even if were to require a little tweaking. If I was in the market i would not hesitate to purchase one.

https://youtu.be/30GJK5n2JUM?si=yfbzyFQt1emrtSFj

[dbaio1]

They appear to be a very nice feeder design and adjustment of the spinner plate seems very simple even if were to require a little tweaking. If I was in the market i would not hesitate to purchase one.

https://youtu.be/30GJK5n2JUM?si=yfbzyFQt1emrtSFj

Great point. Especially considering assembly is probally being done by TSC.

[bgleaton]

Most of the issues have unfortunately been due to assembly but are easy to fix by a couple minor tweaks. We have some videos on our Fair Game Group YouTube page that show how to properly position the spinner plate and 4-legged bracket to ensure there is no side load on the motor shaft. We made some more improvements and the newer Tree Line designs have the motor mount, motor, downspout, spinner plate, etc. all pre-installed by our factory to ensure there are no assembly issues. We will always stand behind the product and have parts in stock that ship out of our warehouse here in Carrollton, TX if you ever need anything. Have a great day!

[mzurovec]

We have three of them, and had issues with one of them, which turned out to be user error. We dropped the spinner plate all the way down on all of them and they've been good for the money.

Also, easy to get in touch with bgleaton to walk through any of the problems.

[Goldensammy]

Most of the issues have unfortunately been due to assembly but are easy to fix by a couple minor tweaks. We have some videos on our Fair Game Group YouTube page that show how to properly position the spinner plate and 4-legged bracket to ensure there is no side load on the motor shaft. We made some more improvements and the newer Tree Line designs have the motor mount, motor, downspout, spinner plate, etc. all pre-installed by our factory to ensure there are no assembly issues. We will always stand behind the product and have parts in stock that ship out of our warehouse here in Carrollton, TX if you ever need anything. Have a great day!

Are they currently 299 or 399? Per the thread below, the sale runs through 9/20, but maybe that was intended to read 9/2?

https://www.texasbowhunter.com/discussions/forums/forum/topics/around-the-campfire/26876176-tree-line-feeders-on-sale