fence for interior storage enclosure

[tdwinklr]

Need some help here for a storage rack enclosure at work.

Boss is wanting to enclose a standard pallet rack that is 10' tall and about
15-18' wide. We're thinking about putting chain link fence on the sides and then
chain link gates on the front that would slide open to the sides, not swinging
open to the front. The fencing would also need the slats in it to where you can't
see what's in the enclosure.
All of this will be inside, on our dock floor.

Any ideas where I can get the poles, hardware, and the fencing 10' tall? We're looking to
do it ourself too.

thanks

[HOOKNBULLET2]

Don’t know where you are. But Viking Fencing in Austin has what you need. I just had them install the one I did in Austin. The install was cheap and they ran the chain link all the way up to the ceiling in our 20’ tall warehouse.

[Texas Grown]

Burly Fence and Hardware, Burleson, Texas.

[stevieray54]

Take a look at Grainger or Global equipment. We did something similar to this. They make a wire rack that fits on the bottom of the rack. We took the wire rack. Welded a 2” piece of flat stock on each end, then welded hinges to one end and welded a hasp to the other.You could talk to a fence contractor, that sells fencing as well.

[tdwinklr]

thanks guys, that helps.