I need help with wagner 130 paint sprayer

[Huntergirl723]

This morning I got the paint bought and I readied everything else for painting a project that I've put off too long. So, as I usually do, I ran some water through the paint holder, hose, and sprayer/tip. For about 25 seconds everything was great but then the motor stopped. I put the selector switch on recycle and it pumped the water just fine, so it's not the motor. The hose or sprayer must be clogged. I then noticed my water source was not clean and probably clogged it. Any and all suggestions will be much appreciated. The brain trust at TBH is awesome. Thank you all very much.

[Bassdeer]

Take the hose off the sprayer and see if it pumps out that fitting. check the filter in the gun,

[Huntergirl723]

Great, thank you very much. I will try this tomorrow and I'll let you know how it goes.

[Brett A]

Take the hose off the sprayer and see if it pumps out that fitting. check the filter in the gun,

This would be my guess.