Help Me Fix The Wobble

[MountainMan]

I've got a new skinning rack I've put together and for some reason she wiggles side to side pretty fierce. Anyone got a good idea where I can brace it to stop the wobble? I'm at the point of way over thinking it now. Thanks!

[Rubeng]

I honestly think those legs are to skinny and flimsy

[Bucknaked]

I agree with TTB but I will add that you way over built the top and way under built the bottom!

[Draco]

There are some design problems there for sure. Cut those wimpy legs off about a foot below the top frame and find you some pipe that will slide over them. Not tubing but pipe. That should stiffen it up and make it where you can take it apart for easier transport.

[WTX]

Agree with the above

[Gerald G]

What they said, need bigger, stiffer legs.

[Drycreek3189]

What they said, need bigger, stiffer legs.

Yes, bigger and stiffer !

[easeup]

got one like it I built years ago....no wiggle.....It has pipe legs....so I think your advisors above got it right

[Walker]

It might have worked if the legs were angled out instead of straight up and down.

[Low Fence]

If applicable:

a screw in ground anchor (like one for dogs) about 8’ out to each side. Cable and turnbuckle. Other than that… just design flaws