Arrow cutting question

[thedosranchhand]

There's a shop in sweetwater. Not in the area or you could borrow mine

Where is it located?

Sent from my Eris using Tapatalk

[Txbhunter1]

I also use a dremel to cut mine. Lock the dremel down with the blade at a 90 deg < to the bench and use a "V" block to spin them as you cut.

[WCB]

I have also used the tubing cutter on carbon arrows with good results. But I would recommend an arrow saw or a shop.
Usually I order mine precut from one of the online stores. That way I have someone to sue...

[Hunting Consult]

no please dont. The photos of the aftermath are horrible to see.

[texag93]

Go see Mark at Abilene Lumber. I bought my boat from him. Tell him Jason said Hi!