Otter Box

[Jaybo31]

Do any of yall have a problem with the screen getting the bubbles under it? I have a screen protector under it but it still does it

Any remedies?

[morris]

On my old 3g I did. I would just take it off every once and awhile and clean it good. On the iphone4 I dont have any problems.

[ACCURACYINC]

I just got a new Droid X and the screen protector was built into the Otter Box. Not sure it'll last long, but beats the heck outta those bubbling stickers!!

[Target-panic]

My 3G did and dusted it very lightly with powder, then feather dusted it out.

My 4G has not had that issue yet.

[Jaybo31]

I do and it does it instantly. I had a guy tell me here at work that he cut the plastic out of it put a screen protector on the phone.

[Robbie93hunt]

Try blowdrying the bubbles out of it

[Smart]

Based on recommendation from other TBHer's, I took out the Otter box screen, installed a Zagg screen protector and after a year it is still going strong....

[red]

My 3G did and dusted it very lightly with powder, then feather dusted it out.

My 4G has not had that issue yet.

this is what i did to mine for a while. works good. or punch off the screen cover it comes with and put an aftermarket one on the phone before putting it back in the case. thats how im set up now and it works a lot better

[ACCURACYINC]

Roll over it with your truck.... it'll probably remove the bubbles, and test the durability of the Otter Box to boot.

[Bill]

I was told and sold the Apple screen protector film which is on the phone, under the OB plastic sheet and I have no problems. I'd be reluctant to cut off the top one since it held with a water barrier I think.

[Jaybo31]

Thanks everyone. Let me clarify, its not bubbles so to speak. Its the cover sticking to the glass on the phone. I put a screen protector on the phone to prevent this and it sticks to that too. Just wanted to see if anyone else had removed the OB screen and just used a protector. A guy at work told me he did it but I dont trust much of what a mechanical engineer says

[TMC50]

Thanks everyone. Let me clarify, its not bubbles so to speak. Its the cover sticking to the glass on the phone. I put a screen protector on the phone to prevent this and it sticks to that too. Just wanted to see if anyone else had removed the OB screen and just used a protector. A guy at work told me he did it but I dont trust much of what a mechanical engineer says

Baby powder is your friend....

Hold the case about a foot from the top of the bottle, squeeze said bottle, put on....

Wazzam they are gone

[Jaybo31]

Baby powder is your friend....

Hold the case about a foot from the top of the bottle, squeeze said bottle, put on....

Wazzam they are gone

I will try this before I start messing the case up. Thanks!

[Buckdaddy69]

It's gOnna get a couple. I still have mine. It's fir sale . Just to bulky!

[double lung]

Air compressor up the hole where the charger goes. It worked on mine.