Announcement

Collapse
No announcement yet.

Krivoman Blind Shells, New order

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    pm sent

    Comment


      #32
      Originally posted by bowhuntertex View Post
      Are you going to manufacture a short stand? I am thinking only 2' off the ground, with an adjustable leg for the in even hill country terrain.

      I will be looking to get 2-3 like that this summer.
      It took me an hour to build one this weekend with a buddy.

      I used the cinder blocks that have the grooves into it, put it on a base of regular blocks, 2x6 square, a few braces, 3/4 inch top, then bolted the blind to that. Not terribly expensive but it's about 2'6" tall and very nice. I put foam sealer on the lip when I bolted it down and will add carpet next trip.

      Comment


        #33
        Originally posted by Bhuntinfishn View Post
        Are you still able to get these?
        Will have a whole new batch in March.

        Also: People who are interested in the blind need to speak up as they go fast. So I need Deposits to hold your blind.

        Comment


          #34
          Originally posted by Krivoman View Post
          Scaffolding, We aint doing rock work on a building? I can have a tower done in a week though...
          How much for the tower and how tall are they?

          Comment


            #35
            My basic tower is 10 ft tall. Can make shorter if you like. It is $600 for the tower.

            It is one sweet setup...

            Click image for larger version

Name:	new tower tbh.jpg
Views:	2
Size:	263.0 KB
ID:	24053109

            Comment


              #36
              P.M. sent

              Comment


                #37
                My krivoman blind

                Blind number 1 set on the ground, well actually I dug enough dirt out to get the lip deep enough to bury it. It's even cow approved!
                Attached Files
                Last edited by DidIDoThat; 03-26-2012, 06:47 AM. Reason: grammar correction

                Comment

                Working...
                X