Can an experienced Mathews Monster help me with tuning issue

[lesson 101]

I have tried and tried to get this bow in time and it just simply will not happen. Its been sitting on the press for nearly 3 hours adjusting and twisting the cable back and forth and back again and I just CAN NOT get it right. Can someone please tell me where im going wrong and another thing that I need to know is Which holes are for timing I thought it didnt matter long as they rotated equally

[Davik]

Call Mike Cooper...JAVI on here...he can tune anything...and if its any consolation...I haven't been very successful getting my M7 tuned either...

[lesson 101]

Call Mike Cooper...JAVI on here...he can tune anything...and if its any consolation...I haven't been very successful getting my M7 tuned either...

Thanks Ill try to get in touch with him and hopefully get this thing worked out Its been driving me crazy cause I love doing my own work to my bows and this is the only issue I cant resolve without help

[tookeymonster]

Take it to a good Mathews bow tech. They have a timing window.

If you are in the Houston area take it to the Bow Zone and have Richard help you out. He will fix your issue and show you how at the same time. I know lots of people that will not let anyone but Richard touch their bow, including me.

[lesson 101]

Take it to a good Mathews bow tech. They have a timing window.

If you are in the Houston area take it to the Bow Zone and have Richard help you out. He will fix your issue and show you how at the same time. I know lots of people that will not let anyone but Richard touch their bow, including me.

I sure do appreciate it I live about an hour frlom houston so I will give it a shot.

[LWolken]

I would take it to Richard he used to shoot a monster for awhile.