I'm going to build an arrow backstop and I need some suggestions
X
-
Last edited by Husker; 01-30-2011, 03:58 PM.
Comment
-
Originally posted by Chew View PostScrap landscaping timbers for the base, scrap 2x4's for the frame. I think it is about 5 or 6 wide by 5' tall. I would use 2 layers of scrap carpet. My recurve never went through but a complete target miss with the bowtech would go through to the fence and stop.
Comment
-
Just draped loose over the top. You can staple it or nail it down on top if you want but I had no problem with it moving. Like I said, if you have a fast bow you may need two layers of carpet. Or just don't move it too close to a fence and it won't hit anything.
Last edited by Chew; 01-30-2011, 04:31 PM.
Comment
-
Originally posted by Chew View PostJust draped loose over the top. You can staple it or nail it down on top if you want but I had no problem with it moving. Like I said, if you have a fast bow you may need two layers of carpet. Or just don't move it too close to a fence and it won't hit anything.
Comment
Comment