Best Expandable Broadheads?

[DamonJ]

I am a fan of the 3 blade RAGE !!!!

[Sippy]

bloodrunner

[SFAthumper]

Awesome to see all fo the wasp jackhammer enthusiasts out there. Ive been using the jackhammers for 3 years now with no complaints. The 1 and 3/4 inch diameter cut is plenty for whitetails, hogs, and just about anything else you could send an arrow through.

I had a buck that I hit through the front shoulder (i tweaked the bow on the shot and pulled left a littl)...... long story short is the broadhead broke through the front shoulder on the entrance and through the front shoulder on the exit side. The arrow broke off but the broadhead did go through both shoulders.... here is a link to the video of this story (broadhead damagae showed at 7:35)........ also, for this particular hunt i was using the 1 an 1/4 inch diameter jackhammers bc i was out of the 1 and 3/4 inch diameter

[ame="http://www.youtube.com/watch?v=tRdXWzPqSYc"]YouTube - East Texas Whitetail Bow Hunt[/ame]



having said all of that, a close 2nd in expandables would be the bloodrunner 2 blade............ a buddy of mine used 1 this past weekend.....

picture of bloodrunner 2 blade damage (note: he is not holding the hole open as ive seen in other pics)

[2050z]

I've taken two javelina and one doe using the Trophy Ridge 3 blade meatseeker. awesome broadhead. Replacing the blades is pretty simple as well.

[Olphart]

Bloodrunner 2 or 3 blade. Not much mechanical about 'em, but they do the job. They don't have to "open" or use O-rings.

[angrybroadhead]

Grimm Reaper Razor Cuts for me, I love em

X2. NAP 2 blade Bloodrunner is great as well.


Rob Bice
www.markcunninghamfoundation.org.

[Kingslayer]

Looking to buy some, what are you guys and gals opinions?

The spitfires by Nap have no o-rings, no rubber bands....Shoot like fieldpoints

[Kingslayer]

If you want to look at a broadhead that is not an expandable, but flies like one and cuts a wicked entrance and exit hole and is tough, look at the Smoke Ramcat.

I would like to try the ramcat on hogs...wicked looking head...and if you dont get a pass thru...the broadhead will cut its way back out of the animal...Both sides of blades are razor sharp

[NomadStalker]

I too am a HUGE fan of the NAP Bloodrunner. I have both the 2 and 3 blade options, and they are accurite and depenable. So far no damage to the blades after a few hogs and 2 deer... I also like the answer from above....

Shoot what is accurite out of your bow. Buy a pack, and share with your buds.. That is how I try 'many' of my broadheads... If you are close to Denton, send me a PM. I have some Rage's, Monotecs, and a few others. Mostly 100 - 125 gr.....

[tmac4468]

Looks like I got my decision cleared up....

[WesTexHunt]

Bloodrunner by NAP!! 2 or 3 blade, I shoot both. Cant beat em. Just depends on what you like.

[thebomb6_99]

Rage 2 blade

[Double L]

A lot of good broadheads out there but my favorites are still the Wasp Jak-Hammers 1 3/4 cut

Wasp jakhammer

Same here 1 3/4 cut. They are not as fancy or pretty as some of the newcomers on the market but these things are tough and get the job done!

[brrdnk]

I have always had good luck with the vortex broadheads

[Fightinaggies]

Another vote for rage 2 blade