09 Z-28 draw length change question?

[bear]

What would I need to make a 27" z-28 a 29" z-28. Is it just a cam or module change or is a new string required also???? Thanks for your help and time

[bear]

well??????

[wassaw]

what year? if 08.5-09 you need a set of #3 Z cams if it's a 2010 (moded cam year) you will need a set of #3 Z mods.

Make sure you tell them it's for a Z-28 Z-cams needed different from Rev cams
link to Elite online parts store

http://www.elitearchery.com/e-gear/index.php?dispatch=categories.view&category_id=170

or you can call Maggie at (877) 503-5483

there is also a forum where you might be able to find a set from a member there. (won't post a link to another forum but it shows up in a google search)

[bear]

thank you tons, would I also need a new string with the cam change on my 2009 z-28

[wassaw]

thank you tons, would I also need a new string with the cam change on my 2009 z-28

just saw the 09 in the title bar sorry, you need a set of 09 #3 Z-cams and no you will not need a different length harness.

[bear]

much abliged, any idea on z3 cam costs?

[wassaw]

$50 bucks right now from the E store (a set)

http://www.elitearchery.com/e-gear/index.php?dispatch=categories.view&category_id=170

close to the bottom DLS (draw length specific) 97 items left for #3 cam

[bear]

thank you again



to H^M be the glory

[wassaw]

you will need draw stop posts also unless your using the old ones