Axis FMJ gpi

[canny]

I have some that are about 5 yrs old and they show 9.9 gpi. However eastons website shows them at 10.2. Did they increase the weight since mine were made? If I was to get some of the new ones they would be 8.7 grains heavier than what I have now.

[Texastaxi]

Are you looking at the same spine?

8.7 grains probably won't even effect your point of impact.

[txdukklr]

the camo fmj's are a tad heavier. Are you comparing the black ones to the camo ones?

[Sparkles]

My camo 400s are 10.2

[canny]

Yes I'm comparing 400 spines. Also I'm comparing the non cam shafts.

[100%TtId]

I noticed that also. I have both the 9.9 and the 10.2 versions and according to my grain scale, they both weigh the same. I suspect they were always 10.2 but they mislabeled the early versions. To me, they fly the same and I can't tell any difference.

[canny]

I noticed that also. I have both the 9.9 and the 10.2 versions and according to my grain scale, they both weigh the same. I suspect they were always 10.2 but they mislabeled the early versions. To me, they fly the same and I can't tell any difference.

Ok that's good to know. I'm one if those guys that likes all my stuff to be the same regardless.