How high do wire panels or fencing have to be to keep the grazing cows, horse, donkey out and let the deer get to the food plot before I invest the $ to plant one without a fencing deterant for the animals I want to keep out. Thanks for the help.
Announcement
Collapse
No announcement yet.
Cows out Deer In Fence/Panels
Collapse
X
-
I build feeder pens in a triangular shape with 3 strands of barbed wire. Then when the wire starts to sag, I put in another post on one of the 3 sides, pulling the post outwards until the wire is nice and tight again. I can repeat this 2 more times if necessary and have never had a cow/horse/mule/donkey get in the pen. Deer just jump (bucks) or slink through the fence and chow down.
Comment
-
Agressive cows in drought conditions were jumping my 34 inch hog panels. I had to put two strands of barb wire around the top to keep them out. 44 inches was the magic number. Now I just buy 52 inch cow panels and cut part of them down where the der are jumping in and out. works grat and less work
Comment
-
Cheaper to run Barbed Wire.
Leave 18 inches from the ground to your first strand.
Then a few strands 6 to 10 inches apart.
Your top strand should be at least 12 inches from the next one down.
The 18 inches on the bottom are for the does and fawns to scoot under. The bucks will also use it if he's tired, beat up or rack challenged.
The top strand needs at least the foot to keep the buck or doe that chooses to jump over the fence from getting its hind legs hung up and getting eating alive by the yotes.
We've run this type of fences for several years and never had a breakin.
Trap the hog in the food plot or shoot them under the feeder. Lots of fun.
This type of setup is designed to keep the cows out while giving the wildlife an easy way in year round.
If you put up panels high enough to keep the cows and hogs out you just banished most of your deer.
There are several TBH'r who have personally watched a hog climb a panel fence.
Comment
Comment