Mathews cam help

[park5115]

I've been shooting a 28.5 inch draw on my Mathews legacy but in reality I should be shooting a 29-30 inch draw. So there is a 29.5-30 inch cam in the classifieds but it is for a Mathews lx. They are very similar bows made about the same time so I was hoping it might work in my legacy. Anybody know if it will work?

[bowhuntertx]

Are you already shooting with a string loop? If not, just add one. It will get you to your true draw length.

[keatonskidmore]

Get a hoyt. lol

[park5115]

Already got a string loop, I'm 6'3" and really need the extra length.

[Allen]

Mathews cam help

Have you looked at the releases like the Scott's that adjust in length?

[ZZ Pops]

If memory serves me, the LX cams only work on LX bows (I've had two of them). Here is a table of cams for the Legacy bow. You can find it on the Mathews website.

Part# Cam Draw Length (70%) RH or LH
10900A SL3AR 30” RH
10902.5A SL3B.5R 29.5” RH
10902A SL3BR 29” RH

[mason bowhunter]

I have a sl3br 29" rh cam if your intrested.

[tgridley]

Are you already shooting with a string loop? If not, just add one. It will get you to your true draw length.

A string loop changes your anchor point not your draw length.

[Fishndude]

30" = SL3AR cam for 70 lb. Draw bow! Right hand

[Shark Attack]

I can help . Check your pm's .