TBH Braintrust: I need some help.

[thedosranchhand]

I purchased the mechanism from spin-tec to make a tailgate feeder. I finished everything, and ran the wire threw my truck to hook up the motor. And I realized that the motor was turning the wrong way which was pushing the plate up instead allowing it to lower. Is there anything I can do to change it? Take the mechanism apart and reverse something or what?

[Luck_of_the_Draw]

Reverse the wires?

[JMG]

Reverse the wires?

X2

[Tubby]

reverse the polarity

[texag93]

DC motor should reverse if you change the leads.

[hawgman_1]

reverse the wires and it will spin correctly.

[chief262]

Try backing up.

[esnead]

put it on the front of the truck... or reverse the polarity

[Atfulldraw]

you need some counter-clockwise threaded corn.

I think they sell it in Webb County.

[Tubby]

is the feeder right-side up?

[El Coyote]

switch the wires and it will work thats what i did.

[Skinny]

I agree with the Brain Trust on this one!!!

[thedosranchhand]

Thanks fellas

[thedosranchhand]

Switched the wires and it worked like a charm
. Thanks again.