06 silverado a/c problem

[Mayhem]

the problem is that the pigtail that go's into the resister/speed controll melted into it.. burnt the pigtail up pretty good along with the black wire that is in the harness.. the resister/speed controler is not a problem i can get them anywhere, have any of yall had this problem and if so what did yall do about the pigtail. i have found online that you can just cut the wires up the harness enough to work with and splice and new connector. sounds easy enough, my problem is where do i get the connector.

[Mayhem]

ttt

[a3dhunter]

You need to go to your dealer for the pigtail, they can sell it over the counter in parts department.

[Shiner]

Dealer

[Mayhem]

You need to go to your dealer for the pigtail, they can sell it over the counter in parts department.

is it just the pigtail or the whole harnass, i would hope just the connecter pigtail so i can splice the wires, it just sounds cheaper that way.

[arrowflinger83]

just try it all else fails get new pig tails

[KDinTX]

contact local wrecking yards and see if they have the same year truck, take a pic of your with ur phone and go see if they are the same, if so cut the one out of the wrecked truck and splice it in to yours

[Blast-n-cast]

I had a similar problem with my F350 when I had to change the resistor and the dealer sold just the pigtail with the connector. I would think it would be the same for the Chevy.

[KODIAK]

Any parts house selling AC Delco should carry it...dealer for sure. We usually soder and heat shrink the pigtail in to make a good solid connection.

[a3dhunter]

is it just the pigtail or the whole harnass, i would hope just the connecter pigtail so i can splice the wires, it just sounds cheaper that way.

It's been a while since I quoted one, but I believe it is usually the pigtail and connector priced out. I was thinking they were under $50, more like $30 I thought but I could be wrong. It's been about 5-6 months since the last one and my memory isn't what it used to be.
I looked it up from home, there is actually a bulletin outlining replacement of the connector and pigtail and you just splice it in.

[a3dhunter]

We usually soder and heat shrink the pigtail in to make a good solid connection.

Solder and heat shrink.....good advise.

[Bro. Bill]

SIR
If you are in Houston contact me, in the AM i am in the auto salvage business i belive i can help cell# below
LOVE THRU CALVARY
WILD BILL KATO
RED NECK MINISTERS FER CHRIST
24389 PARKER DR
PORTER TX 77365
281-883-6781
"OUR NECKS MAY BE RED BUT IT'S FROM THE BLOOD THAT JESUS SHED"
WITHOUT SUFFERING THERE WOULD BE NO COMPASSION

[Bro. Bill]

I see you are out of town call me anyhow
ups chgs plus the plug we can get ya fixed up