Arrow removal from 3-d Target??

[TEAM SHARK]

Hey Guys:

I just bought a 3-d target and I was wondering what you guys do to remove the arrow from the target? Are there any tips or tricks?

[double lung]

make sure your leg isnt behind the arrow when you are pulling it out. a nock to the shin hurts....allot....

[Shaun]

Before you shoot the arrow take a bar of soap and lightly coat the arrow at the point end about 10-12".

[Osceola]

Rub about 6 to 8 inches of the shaft with a bar of soap and buy a arrow pulling grip.Try twisting the arrow clockwise just a little before pulling.

[rocky]

Pull?

[DrenalinJunkie]

As Skeeter once told me........... Just put some man hands on the shaft and pull!

But really....... a little soap on the first 6-8 inches of your arrow will help alot.

[texag93]

a nock to the shin hurts....allot....

about 2ft. higher does too!

[jaker_cc]

pull and twist.

[Bullydog]

You can borrow my 13 year old son...thats my current method..

[ballisticbudda]

Dip the first 3" - 4" of the arrow shaft into some wax, arrow removal is very easy. I made an applicator out of 3/4" PVC, caps on both ends. Cut a piece of sponge to fit inside, drilled a hole in sponge and filled tube with liquid car wax. I drilled a hole just slightly bigger than my arrow shaft to keep the stuff in the tube. Works great.

[Let-Em-Bleed]

pull like heck, just stand out to the side

[bowhntrmatt]

Bar soap. Or there is commercial arrow lube out there.

BTW, the pull and twist method is a good way to ruin a carbon arrow.

[Cameron]

about 2ft. higher does too!

...or 6" for some of us.

[Osceola]

...or 6" for some of us.

Dreamer

[bowhntrmatt]

Yeah, those knee shots hurt, too. So much for keepin it clean .

BTW Cam, I just wrapped and fletched my arrows. Pure perfection.