reload bench pictures please???

[bowhuntingw]

fixing to build a new one and would like to get some ideas. any reloaders please post up what you have? thanks

[mnsmokepole]

ttt

[dustoffer]

This one's a bit cluttered, but I got the plans off of the National Reloading Manufacturer's Association brochure. I built the top, with sliding doors, etc and set it on a base made from a drafting table I "rescued" from a flood. Put 3/4" MDF on it as a top.

[Tommyh]

Feast your eyes on this!

bench pics

[mnsmokepole]

t

[mnsmokepole]

[muzzlebrake]

Bench from Home depot. Bins from Harbor Freight. An old china cabinet for powder and die storage and other stuff.
Cheap!

[Tilladaddy]

Bench from Home depot. Bins from Harbor Freight. An old china cabinet for powder and die storage and other stuff.
Cheap!

That is great and simple. I may take a few ideas from ya...

[mnsmokepole]

[mnsmokepole]

Finally figured it out

[Dale Moser]

Not for reloading but you might get some ideas....

Notice the bow press, and arrow saw are interchangeable via two "receiver" type tube that I put in the front edge of the bench. I also put another shelf above the existing one in the pic.

I'm also going to get a vise, to attach to a piece of tubing that will slide into one of the "receivers" for re-shafting golf clubs.

[xman59]

Bench from Home depot. Bins from Harbor Freight. An old china cabinet for powder and die storage and other stuff.
Cheap!

nice set up

[BIG IRON]

Just posted this to DIY

http://discussions.texasbowhunter.com/forums/showthread.php?t=124602