R U spined correctly - I can check it for you.

[Nitro1970]

Run this for me please:

Draw weight 70#
29" draw length
2 hard Cams
33" ATA
6" Brace
28" Easton N-fused Epic 340's
3 blazers
100 gr tips

[saeldredjr]

Heres mine. Thanks

Draw weight-70
Draw length-28
Cams-2 (hard im assuming)
ATA-33.5
Brace-6
28" easton n-fused epic 400
3 blazers
100 grain

[TX kyleboy]

Mmmmm Mmmmm. Salad with fresh vegetables from the farmers market topped with my wife's delicious home made dressing, black angus rib-eye medium well, large baked potato with sour cream, onion, and cheese. Rounded off with a large glass of 1995 Silver Oak. That's what I was thinking about as I ate my left over fried rice.

[TX kyleboy]

Run this for me please:

Draw weight 70#
29" draw length
2 hard Cams
33" ATA
6" Brace
28" Easton N-fused Epic 340's
3 blazers
100 gr tips

Nitro,
spined about perfect. Calcs show you should have speeds upwards 280 fps and KE of 73

[Nitro1970]

Nitor,
spined about perfect. Calcs show you should have speeds upwards 280 fps and KE of 73

Thanks and the speed is about right too. The last time I put through the chrony it was 286 but the guy at the shop said it was 6fps off but didnt' say which way it was off.

[TX kyleboy]

Heres mine. Thanks

Draw weight-70
Draw length-28
Cams-2 (hard im assuming)
ATA-33.5
Brace-6
28" easton n-fused epic 400
3 blazers
100 grain

WARNING WARNING WARNING
saeldredjr
Better have some one check out your set up fast. According to the calcs you are dangerously underspined. If you have two med cams then you are much better spined. Good luck.

[TX kyleboy]

Done for now. I'll check back in later tonight or tomorrow if there are any more.

[Drenalin_Ag99]

OK Drenalin, here goes, but just so you know my daughter's a senior at UT so I get one aggie joke. According to your posting you are shooting 2 foot vanes.

According to the calcs you are off the chart stiff. FYI, I used 7.5 brache height and 1 medium cam. Is the arrow length right, excluding tip and nock. Sounds a little short. Learned to watch for that from Sharkhunter's wife.

Nope that is right, 26 inch arrow, I missed the wrong key got me there, that's why I thought I could shoot the 500 just fine, or maybe crank up poundage, but my setup now is shootin good so won't change much, might go back to 500 beman though, my arrows are short based on rest, and I font have but 1 inch past rest, all I know is it is a sure fire shooter!