Feeder pen diameter question...math nerds tune in.

[JeffJ]

Well my head hurts and Im too lazy to do the math. If I want an 80 ft diameter round feed pen, how many 16 foot panels do I need? If you really want to get all fancy assume 1ft overlaps when I connect them. Thanks.

[STGS]

Well my head hurts and Im too lazy to do the math. If I want an 80 ft diameter round feed pen, how many 16 foot panels do I need? If you really want to get all fancy assume 1ft overlaps when I connect them. Thanks.

You need just over 251 ft of panels, so assuming 1 ft overlaps, I would get 17 panels.

[Stins]

i dont have my calculator handy but here is whataa you do

PI()*D/16=#panels
3.14*80/16=#panels

[Okiehunter]

PI()*D/16=#panels
3.14*80/16=#panels

WOW - That makes my head hurt. I am impressed.

[Encinal]

3.141596.......................................... ...... hehehe

[FCTrapper]

Well my head hurts and Im too lazy to do the math. If I want an 80 ft diameter round feed pen, how many 16 foot panels do I need? If you really want to get all fancy assume 1ft overlaps when I connect them. Thanks.

18

[Hunt NXS]

Just buy a bunch, take back what you don't use! Never was too good with math

[conroetomkat]

15.7

[Atfulldraw]

somebody say something about pie?

[blacksunshine]

mmmm....

[huntmaster]

pie r round not square, how's that Rod

[rocoso]

Just buy a bunch, take back what you don't use! Never was too good with math

X2

[bsills]

mmmm....

lmao

[SKLOSS]

mmmm.... warm apple

[Wiederhold]

i dont have my calculator handy but here is whataa you do

PI()*D/16=#panels
3.14*80/16=#panels

You have to have an engineer to build a feed pen. I would have never guessed it!!

Travis,

A guy that offices next to me always says "What is the differece between an engineer and a room full of a**holes?.....The door". We'll see ya'll this weekend. I'm leaving shortly!