I have a bunch of range pickup mixed stamp 40SW brass. I don't have a 40. I do have and reload for 9 and 45. It will be tumbled but not decapped. Any interest and I will get a firm count.
I have a Lee Pro1000 with 3 bases and 4-5 base plates, two turets, and both large and small primer trays. I may put another one up for grabs too...
What caliber bases? I might be interested. I have two currently, one in 9 and one in 45. I do all mine in batches, decapping and sizing, then tumbling and hand priming. If I could get a third and set it up specifically for this step it would save me a lot of set up time.
What caliber bases? I might be interested. I have two currently, one in 9 and one in 45. I do all mine in batches, decapping and sizing, then tumbling and hand priming. If I could get a third and set it up specifically for this step it would save me a lot of set up time.
cleaned out my bench...I have
1 pound sealed can of IMR 4831
1/2 can left of hodgdon H 4831SC.. used to work up a load and found a better powder for the gun
about half a box (50ish) Speer 100gr BTSP 243
1 sealed box 30cal speer btsp 165gr
1 full set RCBS 300 win mag dies- very lightly used
1 full set RCBS 22-250 dies
I could use:
40 sw cal set up (bullets, dies, brass, powder for pistols?) I only reload rifle at this point
7mm mag stuff, have gun I haven't shot will need everything for it
some sierra or other quality hunting bullets for 243 to try loads on (light rounds)
cleaned out my bench...I have
1 pound sealed can of IMR 4831
1/2 can left of hodgdon H 4831SC.. used to work up a load and found a better powder for the gun
about half a box (50ish) Speer 100gr BTSP 243
1 sealed box 30cal speer btsp 165gr
1 full set RCBS 300 win mag dies- very lightly used
1 full set RCBS 22-250 dies
I could use:
40 sw cal set up (bullets, dies, brass, powder for pistols?) I only reload rifle at this point
7mm mag stuff, have gun I haven't shot will need everything for it
some sierra or other quality hunting bullets for 243 to try loads on (light rounds)
cleaned out my bench...I have
1 pound sealed can of IMR 4831
1/2 can left of hodgdon H 4831SC.. used to work up a load and found a better powder for the gun
about half a box (50ish) Speer 100gr BTSP 243
1 sealed box 30cal speer btsp 165gr
1 full set RCBS 300 win mag dies- very lightly used
1 full set RCBS 22-250 dies
I could use:
40 sw cal set up (bullets, dies, brass, powder for pistols?) I only reload rifle at this point
7mm mag stuff, have gun I haven't shot will need everything for it
some sierra or other quality hunting bullets for 243 to try loads on (light rounds)
168 smks or 165 sgk in 30 cal
varget powder.
I have a lot of 7mm and 243 bullets as well as 7mm brass. I've been wanting to try the H4831SC. I'm sending you a PM with my contact info. I'm in Arlington.
Comment