My first attempt at Figure 6

[Lubbock hunter]

A wise man ( Tim Hicks ) once told me not to use HOG PANEL, but to use UTILITY PANEL for your traps and you won't lose one pig from squeezing out. just my .02

[Roscoe]

I did research for a week on these things. I've heard some guys using only 2 or 3 16ft panels. I took 3 out there this morning, hooked them all up together, and it barely made it around my feeder. Had to go get another one to make it decent.

You get about 5' in diameter per 16' panel, so with overlap, don't imagine it was a very big circle left.

[HotRod Hunter]

dr. death sure looks like you had some good tender eaten

[maglite]

I made one that was 120ft across!! It was a little b ig but it worked! The only problem is that the pigs got a good runnin start at the sides when I would pull up to check the trap and they would sometimes jump out when they were piled up but not very often!

[wbhinton]

I have never seen a figure 6 trap before... looks like a good setup

[max8950]

Got any pigs yet?

[ashx2]

killed up to 6 at a time in our little monarch trap and catch more the next day.... all the time.... blood on the ground and everything...

Yep, I killed 4 in my figure 6/9 trap this past Sat and three more just last night. All of them were around 30-35 lbs each. Blood was still visible on the ground from Saturday's kill.

Baited again and will be checking it in the morning.

Use plenty of t-post or you'll be sorry.

Greg

[maglite]

Ive Caught 31 Since Christmas! 2-300lb Boars!

[Grillen Joe]

I need to put one out at our place in Fincastle.. That looks like the kind of trap I should make..